Y-piece 45° symmetrical connector made of galvanized steel plate, including push-fit ends with EPDM double lip rubber seal. Air tightness class C.
Y-piece 90° symmetrical branch made of galvanized steel plate. Push-fit ends with EPDM double lip rubber seal. Air tightness class C.
Zero Level AD Panel is made of regenerated plastic material with high density and 1-mm thickness; it ensures a solid base in the building site and can be walked on. These panels have a tongue along the perimeter to connect them for accurate, secure join. Adhesive layer on the back, moulded surface with studs of 17 mm for 12-mm pipe laying, pipe spacing of 40.5 mm. Size: 1215x810x18 mm.
Zinc-plated steel plates, thickness 1 mm, with or without adhesive, to produce the dry floor screed and to distribute the load. They shall be laid in two layers and shall not be lined up.
Expansion unit to connect zone actuators and/or input from dehumidifiers.
Possible configurations:
- 4 temperature/humidity sensors (Bus connection)
- 2 temperature/humidity sensors + 2 dehumidifier outpus
- temperature/humidity sensors + 1 dehumidifier output + 1 integration output
- 3 temperature/humidity sensors (Bus connection) + 1 dehumidifier output
Installation into 4-module DIN rail - Power Supply 24Vac.
Elegant and intuitive user terminal for managing the unit and displaying room parameters. Wall mounted without rear housing, LCD, non‐isolated 12 V AC/DC power supply, built‐in temperature and humidity sensor. Connection via data bus.
More results
Building acoustics cannot be separated from the use of low-inertia radiant systems. For this reason, RDZ, always attentive to the issues of footfall noise insulation, introduces two important novelties to be combined with its radiant systems: a desolidarising acoustic mat to be placed under the low inertia radiant system called ACU UPL-M, and a second acoustic mat to be placed under the cladding called ACU UT-M. The latter, in the case of undertile installation has a dual advantage: in addition to acoustically insulating the flooring, it drastically reduces the risk of cracking of the covering even in the presence of accidental screed breakage.
RDZ components for the acoustic insulation of the substrates can be combined with RDZ wet underfloor heating systems. They are specifically designed for the acoustic indoor comfort because they provide improved step sound.
Acoustic Plus is an undefloor system operating at a low temperature, specially designed for sound protection. It consists in studded panels made of stretch sintered expanded polystyrene with double density according to UNI EN 13163. Its components and production technology ensure unique acoustic properties and provide improved step sound, thus meeting the standard requirements.
AcuRapid is RDZ new underfloor heating and cooling system, characterized by excellent acoustic properties as well as fast and easy installation thanks to a self-attaching fixation technology for pipe laying. A micro-interlocking band is helically wound around the pipe to secure it quicky to the smooth insulation panel, which is covered with a special film barrier for attaching the pipe. Thanks to the elastic properties of the polysyrene board, the system can provide an average noise reduction of 26 and 28 dB(A) for 20-mm and 30-mm insulation panels, respectively, considering a screed of 100 kg/m² according to UNI EN 12354-2.
RDZ protective additives are used to improve the performance of the heating/cooling systems and to reduce maintenance operations caused by corrosions, encrustations and the microbiological growth.
Air handling units over 500 m³/h have been designed for fresh air ventilation and summer dehumidification in commercial buildings with surface heating and cooling systems. They consists in 2 main parts: the DA dehumidifier and the SR heat recovery unit. This set, available in three different versions, is suitable for medium-sized commercial applications and medium occupant density spaces.
Air handling units up to 500 m³/h have been designed for fresh air ventilation and summer dehumidification in residential buildings with surface heating and cooling systems. Thanks to the air exchange with heat recovery, they ensure top comfort and energy saving.
In summer radiant cooling it is essential to keep air humidity under control.
RDZ dehumidifiers are available in different wall or false ceiling models and allow the maximum efficiency of the system as well as a very high physical well-being to be obtained.
RDZ dehumidifiers are available in different wall or false ceiling models and allow the maximum efficiency of the system as well as a very high physical well-being to be obtained.
The air distribution systems allow the exhausted air to be conveyed outside the buildings and to introduce new air taken from the outside into the room. Consisting of ducts, plenum spaces and accessories, they are modular, versatile and available in different packigurations that facilitate their placement in any context.
Ensuring pleasant and healthy living and working environments throughout the year. This is the task of our air handling and distribution systems: complete and modular systems capable of constantly dehumidifying and exchanging indoor air without wasting thermal energy. Various solutions are available: from units for mechanical ventilation only, to dehumidifiers, to Comfort Units that are machines designed to offer air renewal and summer dehumidification in a single solution. The range of units is completed with a wide range of ducts, plenum spaces and vents to quickly and easily create air distribution systems suitable for any type of application.
The 125-mm duct terminals are used in combination with DUO WHITE and LowAir circular plenum boxes. They are available in different materials and finishings, thus meeting any installation need.
The aluminium duct terminals for the air supply and the air exhaust are equipped with plenum box and air grille, and they are available in two different sizes, either with side or rear entries.
b!klimax 8+ HP is a radiant system with high thermal performance thanks to the adoption of graphite in the surface finish plate surface finish. The central element is the high thermal performance radiant panel with an aluminium diffuser and plasterboard finish.
On the panel is fixed the Ø 8 mm PE-RT pipe with oxygen barrier according to DIN 4726.
b!klimax 8+ System with Plasterboard is a ceiling radiant system for fast installation with a limited number of components. The core of this solution is the radiant panel, which is characterized by a very high thermal output, aluminium difusers, plasterboad finishing and PE-RT pipe Ø 8 mm with oxygen barrier according to DIN 4726.
b!klimax Air+ is RDZ new wall/ceiling radiant system, which has been conceived to ensure cleaner and healthier indoor air. Radiant panels include aluminium metal diffusers and pipe Ø 6 mm with oxygen barrier according to DIN 4726, and they are combined with a special plasterboard which is able to absorb and neutralize indoor pollutants.
b!klimax ceiling and wall radiant system consists in light and handy panels for easy installation. They are made of polystyrene including 6-mm pipe with oxygen barrier according to DIN 4726, and they are covered with a special layer of fibre-reinforced gypsum. They can be combined with any kind of finishing, or they can be plastered.
b!klimax+ Quadrotto HP is a ceiling heating and cooling for commercial applications, which uses a small number of components and offers high performance in terms of both heating and cooling, as certified by accredited testing laboratories. The system consists in metal tiles with Ø 8 mm PE-RT pipe, bevelled edge, micro-perforated surface and plain border of 30 mm. Thanks to the modular structure, hidden and fastened to the ceiling through adjustable hangers, they can be opened with a swinging (“trap-door”) system for inspection and maintenance activities.
b!klimax+ Quadrotto is a ceiling heating and cooling system for fast and easy installation in commercial buildings. It consists in metal or plasterboard tiles suitable for inverted T-shaped suspended ceiling grids of 15 and 24 mm. Pipe Ø 6 mm with oxygen barrier according to DIN 4726 is fixed to the radiant panels through an aluminium metal diffuser.
b!klimax is a heating and cooling system with very low thermal inertia that exploits the ability of the ceilings and walls to exchange heat and cold through irradiation with the room and with people. Innovative, versatile and easy to install, it is available in different variants with metal, plasterboard or fibre-reinforced plaster finish
CLIMAWALL is a heating system operating at a low temperature and using walls as large heating units. The elements composing CLIMAWALL can be used to integrate the underfloor heating or to meet the whole thermal requirements of a building. These simple elements as well as the fast assembly and laying are CLIMAWALL main advantages.
Flexible and rigid circular attenuators for commercial applications, made of aluminium with a sound-absorbing layer. They are available in different length and diameter, and they are designed for round ducting. They are used to reduce noise in those projects involving RDZ Galvanized System.
Control distribution manifolds made of brass are designed and produced specifically for the application in underfloor heating and cooling systems. Since they are totally pre-assembled at our factory, their installation in the building site is even much quicker and easier.
RDZ control systems make it possible to manage and monitor surface heating and cooling in floors, ceiling and walls in a simple and effective way, always obtaining the best comfort conditions in the room and
maximum system efficiency. Consisting of a combination of expandable controllers and temperature/humidity probes, they are complete, modular and versatile. They can also be used with excellent results from a small family home, to a large multizone building complex or even central energy plants, providing temperature control for every single user.
maximum system efficiency. Consisting of a combination of expandable controllers and temperature/humidity probes, they are complete, modular and versatile. They can also be used with excellent results from a small family home, to a large multizone building complex or even central energy plants, providing temperature control for every single user.
The control units for managing room comfort in buildings with centralized energy production are expandable and modular regulation systems suitable for buildings with several residential units with different needs served by a single heating or cooling generator.
The control units for managing room comfort in buildings with independent energy production are expandable and modular regulation systems necessary for the constant control of the operating parameters of the radiant and air handling systems.
Expandable multi-zone control system, suitable for the management of heating and cooling of radiant systems with
autonomous energy production. In its maximum expansion it is capable of managing
- 64 zones with temperature and humidity sensor
- 6 mixing valves (with 0-10V analogue servomotor)
- 6 air handling units with bus-connected dehumidification+ventilation/freecooling+renewal+integration functionality
- 6 dehumidifiers with dehumidification + integration functionality.
The system includes the management of all central heating units and field equipment.
Cover HP is an undefloor system operating at a low temperature. It consists in studded panels made of sintered polystyrene with graphite ensuring excellent performance in terms of thermal insulation even with low construction height. Cover HP comes in a wide range of thickness variants, and it is suitable in residential and commercial applications for both heating and cooling.
Cover is an undefloor system operating at a low temperature. It consists in studded panels characterized by excellent thermal insulation, high compression strength, fast and easy installation as well as great versatility. Cover is suitable for several applications in both residential and commercial buildings, and it can be used for heating and cooling.
DA dehumidifiers are used to control indoor humidity in summer, and they are designed for the combination with surface cooling. They shall be installed in false ceilings, and they are suitable for medium-sized commercial buildings and medium occupant density spaces.
The Indoor HR series of mechanical ventilation units are machines that do not require ducting in the room, designed for continuous air renewal in tertiary sector spaces such as schools, offices, shops and RSAs. Available in two versions, 400 and 1000 m³/h, they are designed to be easily integrated into existing buildings. They are offered in different configurations to facilitate the connection of external air intakes (inlet and exhaust) and can be installed either on the ceiling or on the floor depending on the characteristics of the room that houses them. The Indoor HR units consist of a minimalist self-supporting structure in white pre-painted sheet metal and are equipped with rock wool thermo-acoustic insulation, which guarantees high performance also in terms of silence.
RDZ decentralized mechanical ventilation system consists in "single-room" devices suitable for residential applications. They can offer constant air exchange with heat recovery even in those buildings where it is not possible to install any air ductwork (e.g. renovation projects or existing buildings). They represent efficient, noiseless, elegant solutions to ensure clean air as well as energy saving in each season.
DHW and storage tanks for HP heat pumps complete the boiler room and make it possible to store hot water for domestic use as well as the water for the heating and cooling system.
DHW and storage tanks for Wall heat pumps complete the boiler room and make it possible to store hot water for domestic use as well as the water for the heating and cooling system.
The water heaters operating with a heat pump exploit the thermal energy present in the environment or from renewable sources for the production of domestic hot water in complete safety and with high energy savings.
DUO WHITE and LowAir air grilles are plain, versatile, modern and easy to install. They are available in different versions according to their finishing, and they adapt perfectly to any environment.
DUO WHITE by RDZ is an indoor air distribution system consisting in plenum boxes and semi-rigid ducting for air supply and air exhaust. It guarantees a balanced distribution of the flow-rate in each room, while the use of Sanitized® technology ensures that the ducting remains disinfected for its entire operating life. It is a flexible, strong and modular system which is able to suit very different installation layout.
DWC is a summer dehumidification unit for the combination with surface cooling systems in residential application and supply water temperature lower than 11 °C. The high performance and the absence of a refrigerant circuit ensure noiseless running environmental impact (GWP = 0) and very low maintenance and operating costs.
DWF dehumidification modules are used to control indoor humidity in summer. They are not equipped with fans, and they are designed for the combination with RDZ mechanical ventilation units. They can be easily installed in false ceilings, and they are suitable for residential applications.
E-DRY Evo is an underfloor heating and cooling system without screed, characterised by its low weight and its low construction height (34 mm). The system is suitable for new energy-efficient constructions as well as for modernising old buildings. The core of the system consists in the polystyrene panel with an applied heat emitting aluminium foil, 16-mm Comfort multi-layer pipe and the calcium silicate board with tongue and groove profile.
E-DRY Tech is an underfloor heating and cooling system without screed, characterised by its low construction height (29 mm) and its low weight (<6 kg/m²). The system is suitable for applications where it is important to reduce the load on the existing substrates (e.g. refurbishment, lofts, etc). The core of the system consists in the polystyrene panel with an applied aluminium foil for heat emition on the top surface, 16-mm Comfort multi-layer pipe and high-density load distribution layer made of laminated synthethic fibre.
Easy Line is RDZ most competitive range of solutions, including reliabe and efficient products for undefloor heating and cooling. This range is characterized by simplicity and low prices.
EPE System by RDZ is a set of semi-rigid ducting, bends and fittings made of expanded polyethylene. They are light, modular, elastic and impact resistant, and they offer excellent performance in terms of thermal insulation. Their smooth inner surface also reduces pressure loss. They make for fast and easy installation and maintenance, and the final result is smart and pleasant.
As main air ductwork, RDZ offers a wide range of flexible, resistant, lightweight systems for fast and easy installation. They are available in different versions, they include all connection accesories, and they can meet any application needs.
The Comfort Units are machines designed to be combined with radiant systems that perform the dual function of air exchange and summer dehumidification.
Available in different models and with different power, they ensure maximum comfort in any room, both in summer and in winter.
Available in different models and with different power, they ensure maximum comfort in any room, both in summer and in winter.
The Galvanized System for air distribution consists in ducting and accessories made of galvanized steel. It is used in commercial buildings, and it also includes bends, couplings, and connectors in different diameters. The high modularity makes it possible to configure the system in a very easy way according to the design and installation requirements.
GM mixing stations with their compact dimensions and easy mounting contain a high-efficiency circulation pump with variable flow-rate and pressure, and they include a mixing valve to control the supply water temperature. GR supply direct unit can be combined with GM pump stations to control heating and cooling on dual temperature systems, thus using the same water temperature produced by heat generator.
RDZ high efficiency air to water heat pumps are renewable source generators capable of transferring the thermal energy present in the air to the radiant system fluid, to heat in winter, cool in summer and
produce domestic hot water in the respect for the environment, with high energy savings. Available in monobloc and split units, they are suitable for residential and commercial applications and can be effectively used both in new buildings and in the case of energy upgrading of existing systems.
produce domestic hot water in the respect for the environment, with high energy savings. Available in monobloc and split units, they are suitable for residential and commercial applications and can be effectively used both in new buildings and in the case of energy upgrading of existing systems.
Reflair is a new high-efficiency ducted mechanical ventilation unit with heat recovery, designed for residential buildings. It can be installed either on the ceiling or wall.
Thanks to the adjustable and configurable fittings, distribution connections are simple and they guarantee a constant pressure drop, reducing the number of joints required.
The sintered expanded polypropylene construction insulates the internal components and makes the machine extremely lightweight. Thanks to its compact dimensions it can be installed in spaces of reduced height.
Reflair can be controlled by Air Speed or Air Control panels or integrated into the CoRe control system.
RDZ mechanical ventilation systems also include specific devices for horizontal installation in false ceilings or utility rooms in both houses and flats.
They are available in different versions according to the air volume, they shall be combined with air ductwork, and they are suitable for new builings and renovation projects.
They are available in different versions according to the air volume, they shall be combined with air ductwork, and they are suitable for new builings and renovation projects.
HP heat pumps are monoblock units ranging from 6 kW to 14 kW. Provided with Full DC Inverter technology, they are versatile, reliabile, silent and very efficient solutions, which can be controlled through a LCD remote control for user-friendly and easy operation.
HR series mechanical ventilation units with heat recovery are machines designed to treat large volumes of air. Available in a wide range of power ratings and configurations, they meet the air changeover needs of tertiary buildings of different types and sizes.
The HR UA series of mechanical ventilation units with heat recovery are machines designed to treat large volumes of air. Available in a wide range of capacities and configurations, they meet the needs for air exchange in tertiary buildings of different types and sizes.
The units are constructed with self-supporting sandwich panels made of 40 mm thick pre-painted sheet metal with rock wool thermo-acoustic insulation. They are equipped with a polypropylene countercurrent heat recovery unit with > 90% efficiency and are fitted with EC-type centrifugal fans with backward inclined blades.
INDUSTRIAL MESH system is the ideal underfloor heating solution for large-scale industrial applications. The system can be positioned directly onto the rolled screed and fixed into position after the required sealing operations have been carried out, or simply onto an insulating layer (smooth panels or insulating casting). PE-Xc pipe Ø 20 mm can be secured on the mesh by using suitable industrial clips. In case of a very large surface, you can use PE-Xa pipe Ø 25 mm with stainless steel manifolds Ø 2’’.
RDZ Industrial System with high-density studded panels is the ideal heating solution for warehouses, where it is essential to guarantee the thermal performance and to reduce inertia. The insulating panel can be positioned directly on the rolled screed surface and fixed after the required sealing operations have been carried out.
MULTI-ZONE CONTROLLER - 1 MIXING VALVE
Control system up to 16 zones to manage autonomous surface heating and cooling.
This solution can control two different types of installation:
- SURFACE HEATING + COOLING
In its top configuration, the controller can manage:
- 16 temperature/humidity sensors
- 1 mixing valve (with 0-10V analog actuator)
- 2 air handling units with Bus connection for dehumidification - recirculation/free-cooling - fresh aire ventilation - integration
- SURFACE HEATING + SUMMER AIR CONDITIONING (FAN COIL UNITS);
In its top configuration, the controller can manage:
- 8 temperature/humidity sensors
- 1 mixing valve (with 0-10V analog actuator)
- 8 fan coil units with 3-speed regulation or 0-10V signal.
Control system up to 16 zones to manage autonomous surface heating and cooling.
This solution can control two different types of installation:
- SURFACE HEATING + COOLING
In its top configuration, the controller can manage:
- 16 temperature/humidity sensors
- 1 mixing valve (with 0-10V analog actuator)
- 2 air handling units with Bus connection for dehumidification - recirculation/free-cooling - fresh aire ventilation - integration
- SURFACE HEATING + SUMMER AIR CONDITIONING (FAN COIL UNITS);
In its top configuration, the controller can manage:
- 8 temperature/humidity sensors
- 1 mixing valve (with 0-10V analog actuator)
- 8 fan coil units with 3-speed regulation or 0-10V signal.
RS485 CONNECTION – MULTI-ZONE CONTROL – 1 MIXING VALVE
Room climate controller to manage surface heating and cooling system with central supply with RS485 connection.
The system can monitor the components in the boiler room as well as the other devices controlling room zones. In its top configuration, it can manage up to 64 LC.NET controllers.
Room climate controller to manage surface heating and cooling system with central supply with RS485 connection.
The system can monitor the components in the boiler room as well as the other devices controlling room zones. In its top configuration, it can manage up to 64 LC.NET controllers.
Galvanised sheet metal linear diffusers for ceiling installation (PLA-FLOW) or ceiling and wall installation (PLA 80).
LowAir by RDZ is an indoor air distribution system designed for compact applications. The core of this system is represented by the flexible ducting with semi‐oval section. It is double‐walled, corrugated outside and smooth inside to minimize pressure losses and to ensure long‐term cleanliness. The wide range of components helps and speeds up installation.
Control Ø 20 and Industry distribution manifolds can be combined with all RDZ industrial floor systems and are suitable for connecting Ø 20 or 25 mm pipes.
The distribution manifolds, the components for the acoustic insulation of the lofts, the liquids for treating the systems and the equipment are essential to ensure an excellent, easy and safe execution of RDZ underfloor radiant systems.
Mechanical ventilation units are essential machines for guaranteeing comfort in indoors. By forcing the exchange of indoor air and recovering its heat, they offer healthy, oxygen-rich rooms while ensuring high energy savings
The range of Green Tech monoblock heat pumps is an ideal solution for heating, cooling and producing domestic hot water while respecting the environment. Silent, reliable and with high energy saving performances, they are suitable for residential and small commercial applications.
MRC module is a pre-assembled unit for summer/winter climatic regulation and energy metering of underfloor systems in buildings with central heating and cooling.
NEW PLUS is an undefloor system operating at a low temperature, specially designed for moderning old buildings and in those applications where it is necessary to use low installation height. NEW PLUS consists in studded panels made of expanded polystyrene with closed-cell structure according to UNI EN 13163, ensuring high compression strength as well as fast and easy installation.
The outdoor vents in rectangular or round version are designed for wall installation, and they are used to eliminate the indoor stale air and to filter the incoming fresh air.
PDC UE heat pumps come in a wide range of models ranging from 5 kW to 25 kW. They are designed for outdoor installation, and they are connected to the indoor units by means of a copper line for the refrigerant (gas) circulation. They are characterized by high performance, high efficiency and “A++” energy class rating
PDC Wall heat pumps are indoor units for wall-mounting installation. They are connected to the outdoor units by means of a copper line for the refrigerant (gas) circulation, and they represent an efficient, versatile and compact solution with remote control. All components are accessible from the front side of the module, thus making for fast and easy maintenance.
PDC Floor heat pumps are indoor units for floor-standing installation. They are connected to the outdoor units by means of a copper line for the refrigerant (gas) circulation, and they represent an elegant and compact solution including a 200-L tank with instantaneous heat exchanger for domestic hot water.
PDC Floor X heat pumps are indoor units for floor-standing installation. They are connected to the outdoor units by means of a copper line for the refrigerant (gas) circulation, and they include a 200-L tank with instantaneous heat exchanger for DHW as well as a 24-L tank for the right operation of the radiant system.
Filtering the air that enters buildings is essential to ensure a healthy environment. Although outside air is rich in oxygen, it can be contaminated with pollutants that it is important to remove in order to maintain high standards of indoor air quality. The filter box is a specially designed module to enhance the filtration of outside air. Made of galvanised sheet metal, it can house class F7 and F9 filters and is compatible with ducting of different diameters. Being independent of the mechanical ventilation unit, it can be integrated into any air treatment system.
RDZ industrial system with SUPPORTING BARS is the ideal heating solution for industrial warehouses. The system consists in PVC bars with U-profile for pipe Ø 20 mm or Ø 25 mm, pipe spacing 50 or 100 mm, and adhesive backside for combination with the polyethylene foil. The system can be installed with or without insulation layer. Furthermore, suitable staples secure the panels on the substrate.
Rapid US is a plastic material panel suitably covered with a screen-printed non-woven fabric sheet with a 50 mm pitch, which acts as a support for the PE-RT pipe equipped with a suitable hook system that can therefore be fixed to the panel without the aid of clips. The panel is presented in sheets folded in two with a useful size of 2x1 m, with a small footprint and therefore easy to transport due to the low volume involved as well as its light weight.
The system is suitable for low-inertia systems, occupying a total thickness of only 30 mm.
RDZ recessed wall-mounted mechanical ventilation units provide fresh air whilst retaining most of the energy used in heating the house, thus offering invisible and efficient solutions, which can be easily installed in any place. They consist in 3 main parts (recessed box, ventilation unit and front panel) that can be purchased in stages according to the progress of the building site.
RNW dehumidifiers are used to control indoor humidity in summer, and they have been designed for the combination with surface cooling. The range includes wall-mounted and ceiling-mounted solutions in different models for different residential applications.
Smooth Cover HP is an undefloor system operating at a low temperature. It consists in smooth panels made of expanded polystyrene with graphite, characterized by high compression strength and excellent thermal insulation even with low construction height. This panel is combined with a special plastic film of 0.15 mm and laying pattern on the surface for easier pipe installation.
Split heat pump units are an ideal green solution for heating, cooling and the production of domestic hot water in the residential and small commercial applications. Supplied as two separate units, they ensure silent operation, with reduced overall dimensions, and protection against low external temperatures.
Super D is an underfloor heating and cooling system with very low thermal inertia. It consists of RDZ CLIMA PB pipe Ø 12 mm and insulation panels with high compression strength, thus matching with special levelling compounds. This system comes in a wide range of thickness values in order to meet several design requirements, and it achieves very high performance even with low installation height. That is why Super D System is suitable for modernising old buildings as well as in new buildings.
Super D17 is a new compact underfloor heating and cooling system for renovation projects and very well insulated buildings, which need a quick response time according to the change in heat loss and heat load. This system consists in insulation panels with high compression strength, thus matching with special self-levelling compounds. The PE-Xa Ø 17 mm pipe also ensures a limited number of outlets: therefore, one manifold can be used for a wide surface.
With radiant systems, the diffusion of heat and coolnessin the rooms is mainly by irradiation. The temperatures are distributed evenly, ensuring ideal well-being for the human body and significant energy savings. The rooms are basic and free from clutter to offer safe spaces and maximum furnishing freedom. Thanks to the absence of convection circulation and the integration into floors, ceilings or walls, the rooms are also healthy and easy to clean. The wide range of solutions available allows their optimum use in any building intervention and application sector.
The system's proper operation cannot be excluded from the choice of the right thermoregulation device which, in addition to facilitating the preparation of the boiler room, guarantees maximum system performance.
RDZ thermoregulation kit occupies little more space than traditional distribution manifolds, and it contains all necessary elements for temperature control. RDZ kit operates with heat generators including their own circulation pump, and it can be connected with high-temperature units.
Temperature and humidity are environmental parameters that must necessarily be monitored for thermal well-being in buildings. In this regard, RDZ offers a complete range of efficient and easy to use thermostats and humidistats.
Top Composit distribution manifolds made of tecnopolymer are designed and produced specifically for the application in underfloor heating and cooling systems. Since they are totally pre-assembled at our factory, their installation in the building site is even much quicker and easier.
Traditional floor radiant systems use water that circulates in a grid of pipes embedded in the floor to heat and cool rooms using the principle of irradiation. Available in different variants, they guarantee comfort, reduced consumption, spacious and healthy rooms.
Underfloor heating systems are suitable for high buildings since the diffusion of heat by radiation allows heating to a man's height. In addition to maximum comfort, they offer exceptional results in terms of consumption. They also guarantee healthy uncluttered environment without currents of air or dust.
The low thermal inertia radiant systems offer all the advantages of a traditional underfloor system with limited overall dimensions. They are ideal for renovations, and guarantee high performance in terms of system reactivity and containing consumption.
RDZ mechanical ventilation systems also include specific devices for floor-standing or wall-mounted installation in suitable cabinets or in the utility room in both houses and flats.
They are available in different versions according to the air volume, they shall be coupled with a supply and return air ductwork system, and they are designed for new builings and renovation projects.
They are available in different versions according to the air volume, they shall be coupled with a supply and return air ductwork system, and they are designed for new builings and renovation projects.
MULTI-ZONE CONTROLLER - MORE MIXING VALVES
Modular and expandable system to control autonomous surface heating and cooling system. In its top configuration, it can manage:
- 64 temperature/humidity sensors
- 8 mixing valves (with 0-10V analog actuator)
- 8 air handling units with Bus connection for dehumidification - recirculation/free-cooling - fresh aire ventilation - integration
- 64 dehumidifiers for humidity control and integration of sensible capacity
This system can monitor the components in the boiler room as well as the other temperature devices.
Modular and expandable system to control autonomous surface heating and cooling system. In its top configuration, it can manage:
- 64 temperature/humidity sensors
- 8 mixing valves (with 0-10V analog actuator)
- 8 air handling units with Bus connection for dehumidification - recirculation/free-cooling - fresh aire ventilation - integration
- 64 dehumidifiers for humidity control and integration of sensible capacity
This system can monitor the components in the boiler room as well as the other temperature devices.
Zero Level AD is an ultra-thin underfloor heating and cooling system, which represents the ideal solution for retrofit projects. It is easy to install directly onto the existing floor or onto a high-density insulating slab (> 400 kPa). The system includes RDZ CLIMA PB pipe Ø 12 mm and perforated panels made of 1-mm compact polystyrene with high density and self-adhesive back. Its special design with holes ensures that the levelling compounds can flow in and bond directly with the substrate.